honda — Crankcase/Balancer

4) Align the alignment mark on the front balancer holder with the projection on the rear balancer shaft. [2] PROJECTION [1] REAR BALANCER SHAFT [3] ALIGNMENT MARK 5) Hold the rear balancer shaft by inserting the special tool into the maintenance hole in the front balancer. [2] MAINTENANCE HOLE [1] PIN DRIVER, 6.0 mm 07744-0010500 TOOL: Pin driver, 6.0 mm 07744-0010500 NOTICE Check that the special tool is inserted in the balancer case assembly securely. [3] REAR BALANCER SHAFT 6) Install the balancer chain on the crankshaft sprocket while aligning the “ ” mark on the crankshaft sprocket with the color plate (1 place) of the balancer chain.

[1] CRANKSHAFT SPROCKET [2] BALANCER CHAIN [3] “ ” MARK [4] COLOR PLATE (1 place) 7) Install the driven sprocket on the balancer chain while aligning the alignment mark on the driven sprocket with the color plates (2 places) of the balancer chain. [1] COLOR PLATE (2 places) [4] ALIGNMENT MARK [3] BALANCER CHAIN [2] DRIVEN SPROCKET 12-9