BF135A•BF150A YES Clean the water screen. NO Check the water pump and replace if necessary. Check the water tube for blockage and deformation. Replace if necessary. YES The system is restored to nor- mal operation. NO Replace the thermostat. 2-36 From P. 2-33 Stop the engine and check the water screen. Is the water screen clogged? N O Start the engine and check the water check port with the engine idling. Does the cooling water flow through the water check port continuously? Y ES Put the outboard motor into gear and let the engine idle for a few minutes to cool it down. Do the overheat indicator light go OFF and the warning buzzer stop sounding? N O Check the thermostat.
Is the thermostat normal? Y ES Perform ECT sensor 2, 3, and 4 troubleshooting (P. 5-51, 52, and 55 or 5-84. 86, and 89).