6) Install the piston rings in the ring grooves in the piston with the marker marks on the top ring and the second ring facing up. Install the side rail (top side) by aligning the lug of the side rail (top side) with the positioning groove in the ring groove. [1] TOP RING [2] SECOND RING [3] SIDE RAIL (TOP SIDE) NOTICE Clean the ring grooves thoroughly before installing the piston rings. Install the piston rings with care not to break the piston rings. Take care not to score or scratch the piston. Do not confuse the top ring and the second ring. The top ring is glossy while the second ring can be identified with the dark color.
To install the oil rings, install the spacer first, then install the side rails. Be sure that the lug of the side rail (top side) sets in the positioning groove securely. [4] OIL RINGS (SKIRT SIDE) [8] LUG [1] DIMENSIONS OF PISTON RING: [2] TOP RING A: 3.1 mm B: 1.2 mm SECOND RING A: 3.4 mm B: 1.2 mm [9] PISTON [3] SIDE RAIL (TOP SIDE) 7) After installing the piston rings, check for smooth movement of each ring. [Except side rail (top side)] 8) Stagger the piston ring end gaps as shown. NOTICE Do not align with the piston pin and avoid the direction that makes a right angle with the piston pin.
13-20 [5] [6] SID SPACER (SK [7] GROOVE B A B A [1] TOP RING [2] SECOND RING [3] SIDE RAIL (TOP SIDE) [4] SPACER [5] SIDE RAIL (SKIRT SIDE) [7] APPROX. 10˚ [6] [8] [9] SIDE RAIL APPROX. 15˚ SPACER RING END GAP END GAP (TOP SIDE) [8] APPROX. 15˚ [FIXED POSITION] [10] SIDE RAIL END GAP [11] (SKIRT SIDE) APPROX.120˚ [11] APPROX. 120˚ [12] PISTON PIN [14] [13] SECOND RING TOP RING END GAP END GAP [9] 15˚ SPACER RING END GAP P SIDE) ED ITION] ROX.120˚ [8] APPR [10] SIDE END G (SKIR [11] APPROX. [12] PIS PIN [13] SECOND RIN END GAP OX. 15˚ RAIL AP T SIDE) 120˚ TON G SECOND RIN END GAP APP ROX.12