15) Clean the cylinder block and lower block mating surfaces thoroughly with the degreasing cleaning agent. [1] Apply a bead of liquid gasket. 16) Apply a bead [ш2.0 – 3.0 mm (ш0.08 – 0.12 in.)] of the liquid gasket (ThreeBond ® #1280B or equivalent) to the indicated area of the cylinder block. NOTICE Assemble the lower block within 5 minutes after applying the liquid gasket. If it has been left for 5 minutes or longer, remove the old liquid gasket and apply the liquid gasket again. Do not pour the engine oil in the oil tank at least 30 minutes after assembly. 17) Install the eleven dowel pins and the lower block on the cylinder block.
[1] LOWER BLOCK [2] 13 x 14 mm DOWEL PIN (10) [3] 18 x 22 mm DOWEL PIN 13-24