honda — Propellor/Gear Case/Extension Case/Oil Case

6) Clean the extension case and oil case mating surfaces with a degreasing cleaning solvent and a shop towel. [1] EXTENSION CASE 7) Apply sealant to the entire sealing surface of the oil case side of the extension case (ThreeBond ® #5222B or equivalent). [2] Sealant (ThreeBond ® #5222B) application area 8) Apply grease to the water tube end. Install the extension case on the outboard motor aligning the water tube with the extension case grommet. [1] WATER TUBE 9) Tighten the eight 10 x 40 mm flange bolts to the specified torque. TORQUE: 39 N . m (4.0 kgf . m, 29 lbf . ft) 10 x 40 (8) [3] EXTENSION CASE [2] EXTENSION CASE GROMMET 14-92