honda — Power Trim/Tilt Assembly

5) Apply grease to the circumference and the mating surfaces of the two new 22 x 35 x 7 mm water seals. [1] installation direction> 6) Install the 22 x 35 x 7 mm water seals one by one in the mounting case using the special tools as shown. Note the installation direction of the water seals. [3] DRIVER 07749-0010000 7) After installing the water seals, apply 2 – 4 g (0.07 – 0.14 oz) of grease to the lip and the area around the lip of the water seals. [2] (Apply grease to the circumference and mating surfaces of the seals.) Note the installation direction of the water seals. TOOLS:

Driver 07749-0010000 Attachment, 32 x 35 mm 07746-0010100 Pilot, 22 mm 07746-0041000 [4] ATTACHMENT, 32 x 35 mm 07746-0010100 [5] PILOT, 22 mm 07746-0041000 8) Apply grease to the circumference of the new 14 x 26 x 8 mm water seal. [1] direction> 9) Install the water seal with the special tools as shown. Note the installation direction. [3] DRIVER 07749-0010000 10) After installing the water seal, apply 2 – 4 g (0.07 – 0.14 oz) of grease to the lip and the area around the lip of the water seal. Note the installation direction of the water seal. [2] (Apply grease to the circumference and the lip of the seal.) TOOLS:

Driver 07749-0010000 Attachment, 24 x 26 mm 07746-0010700 Pilot, 12 mm 07746-0040100 [4] ATTACHMENT, 24 x 26 mm 07746-0010700 [5] 14 x 26 x 8 mm WATER SEAL [6] PILOT, 12 mm 07746-0040100 15-6