honda — Power Trim/Tilt Assembly

11) Apply grease to the shift shaft A installation part in the mounting case. [1] SHIFT SHAFT A 12) Set the shift shaft A on the mounting case and install the 14 mm washer and the 12 mm E-ring on the shift shaft A. [2] 14 mm WASHER [3] 12 mm E-RING 13) Install the shift shaft washer on the mounting case. 14) Apply grease to the shift shaft B installation part in the mounting case. [1] SHIFT SHAFT B Install the shift shaft B on the mounting case aligning the punch mark on the shift shaft B with the punch mark on the shift shaft A as shown. [2] SHIFT SHAFT WASHER [1] SHIFT SHAFT B [3] SHIFT SHAFT A [4] PUNCH MARKS 15-7