8) Apply grease to the outer surface of the swivel case liner. [4] SWIVEL CASE LINER Install the swivel case liner aligning the projection on the swivel case liner with the concave in the swivel case. 9) Apply grease the circumference of the new 39.5 x 52 x 6 mm oil seal and install it in the bottom of the swivel case. Note the installation direction of the oil seal. Apply grease to the oil seal lip. PROJECTION 39.5 x 52 x 6 mm OIL SEAL 10) Apply grease to the surface of the 34 mm thrust washer and install it on the mount frame. [1] MOUNT FRAME Apply grease to the entire surface of the mount frame shaft and install the mount frame on the swivel case.
Install the mount frame with care not to push the swivel case liner out of the swivel case. [2] SWIVEL CASE 11) Apply grease to the surface of the 40 mm wave washer and install it on the mount frame. [4] 34 mm THRUST WASHER [3] 40 mm WAVE WASHER 15-27 ON CASE [1] CON 4] SWIVEL CASE LINER [3 P [5] 39.5