honda — Power Trim/Tilt Assembly

SHORT CIRCUIT TEST – CORE-TO-COMMUTATOR Check for continuity between the commutator and armature coil core. If continuity exists, replace the armature. SHORT CIRCUIT TEST – SHAFT-TO-COMMUTATOR Check for continuity between the commutator and armature shaft. If there is continuity, replace the armature. SHORT CIRCUIT TEST – ARMATURE Place the armature on an armature tester. Hold a hacksaw blade close to the armature core. If the blade is attracted to the core or vibrates when the core is turned, the armature is shorted. Replace the armature. 15-56