honda — Shift Arm/Neutral Switch

e. REMOTE CONTROL CABLE (THROTTLE SIDE) INSTALLATION 1) Apply marine grease to the link pin and the mounting part of the link pin on the shift pivot. [1] LINK PIN 2) Set the remote control cable (throttle side) shift pivot on the throttle arm link pin. [2] (MARINE GREASE) 3) Adjust the throttle control cable/throttle link (P. 3-26). Tighten the shift pivot lock nut securely. 4) Install the following parts. – Front separate cover (P. 4-7) – Engine cover (P. 4-2) [4] SHIFT PIVOT [3] REMOTE CONTROL CABLE (Throttle side) 17-10