honda — Electrical Equipment

18. ELECTRICAL EQUIPMENT 1. STARTER MOTOR 2. STARTER CABLE 3. ECM/PGM-FI MAIN RELAY/FUSE BOX 4. POWER TILT RELAY/CONNECTOR BRACKET A 1. STARTER MOTOR a. REMOVAL 1) Disconnect the negative (–) cable from the battery negative terminal. 2) Disconnect the main relay (White) terminal from the magnetic switch. 3) Move the terminal cover aside and remove the 8 mm washer-nuts and the 8 mm washer. Disconnect the alternator fuse cable and the starter cable from the starter magnetic switch. 4) Loosen the 10 x 90 mm flange bolt fully. 5) Remove the starter motor together with the 10 x 90 mm flange bolt. 6) Remove the O-ring from the starter motor. Replace the O-ring.

[1] 8 mm WASHER-NUT (2) [2] ALTERNATOR FUSE CABLE [9] 8 mm WASHER [8] STARTER MOTOR [3] STARTER CABLE [4] MAIN RELAY TERMINAL (W) [5] 10 x 90 Loosen fully and remove together with the starter motor. [6] STARTER MAGNETIC SWITCH [7] O-RING Do not reuse. 18-1