• MICA DEPTH Measure the mica depth. If the grooves are clogged or mica depth is less than the service limit, recut the grooves using a hacksaw blade or a small file. • COMMUTATOR 1) Measure the commutator O.D. If the measurement is less than the service limit, replace the armature with a new one. 2) Measure the commutator runout using a dial gauge. If the measurement is more than the service limit, replace the armature with a new one. 3) Check the commutator (insulaor) for damage, dust, dirt and metal particles. If there is stain, irregularity and/or evidence of burning, clean with an emery paper #500 or #600.
18-6 STANDARD SERVICE LIMIT 0.4 – 0.5 mm (0.016 – 0.020 in) 0.2 mm (0.008 in) STANDARD SERVICE LIMIT 29.4 mm (1.16 in) 28.8 mm (1.13 in) STANDARD 0.1 mm (0.004 in)