honda — Electrical Equipment

• ARMATURE Check the armature and shaft gear for wear and damage. • ARMATURE SHORT-CIRCUIT TEST Place the armature in an armature tester (commercially available). Hold a hacksaw blade close to the armature core. If the blade is attracted to the core or vibrates when the core is turned, the armature is shorted. Replace the armature. • CONTINUITY CHECK – SEGMENTS Check for continuity between each segment.If an open circuit exists between any two segments, replace the armature. • SHORT-CIRCUIT TEST – SHAFT-TO- COMMUTATOR Check for continuity between the commutator and armature shaft. If there is continuity, replace the armature. 18-7