• FRONT BRACKET ASSEMBLY 1) Apply grease to the sliding surface of the clutch fork. 2) Set the clutch fork in the indicated position of the overrunning clutch. [1] CLUTCH FORK [2] OVERRUNNING CLUTCH 3) Install the overrunning clutch assembly on the front bracket. Install by aligning the projection on the outer surface of the ring gear with the groove in the front bracket. [1] GROOVE [2] PROJECTION [3] OVERRUNNING CLUTCH [4] CLUTCH FORK [5] FRONT BRACKET 4) Install the gasket. Install by aligning the projections on the gasket with the grooves in the front bracket. [1] GASKET [4] PROJECTION [2] FRONT BRACKET [3] GROOVE 5) Apply grease to the planetary gears, steel ball and the internal gear.
[2] STEEL BALL 6) Install the planetary gears, steel ball and the internal gear. [1] PLANETARY GEAR (3) 18-11