honda — Electrical Equipment

e. INSTALLATION 1) Apply the engine oil to the new O-ring. 2) Set the two 10 x 90 mm flange bolts on the starter motor, and install both the starter motor and the two 10 x 90 mm flange bolts on the engine. 3) Tighten the two 10 x 90 mm flange bolts to the specified torque. TORQUE: 44 N . m (4.5 kgf . m, 33 lbf . ft) 4) Connect the starter cable to the starter magnetic switch and tighten the 8 mm washer-nut to the specified torque. TORQUE: 11 N . m (1.1 kgf . m, 8 lbf . ft) 5) Install the 8 mm washer and the alternator fuse cable on the starter magnetic switch and tighten the 8 mm washer- nut to the specified torque. TORQUE: 11 N . m (1.1 kgf . m, 8 lbf .

ft) 6) Connect the main relay (White) terminal to the starter magnetic switch. 7) Install the terminal cover securely. [1] 8 mm WASHER-NUT [3] 8 mm WASHER [1] 8 mm WASHER-NUT 11 N . m (1.1 kgf . m, 8 lbf . ft) [4] ALTERNATOR FUSE CABLE 11 N . m (1.1 kgf . m, 8 lbf . ft) [2] STARTER MOTOR [5] STARTER CABLE [6] MAIN RELAY TERMINAL (W) [7] 10 x 90 (2) Install on the engine together with the starter motor. TORQUE: 44 N . m (4.5 kgf . m, 33 lbf . ft) [8] STARTER MAGNETIC SWITCH [9] O-RING Do not reuse. 18-14