honda — Electrical Equipment

• LAF RRELAY Connect the battery positive (+) terminal to the LAF relay No.3 terminal and the battery negative (–) terminal to the No.4 terminal. There must be continuity between the No.1 and No.2 terminal of the LAF relay. [1] LAF RELAY [2] CONNECTOR VIEWED FROM THE FRONT SIDE [3] NO.3 TERMINAL [4] No. 1 TERMINAL [6] No. 4 TERMINAL [5] No. 2 TERMINAL • ALTERNATOR FUSE BOX/FUSE NOTICE [1] ALTERNATOR FUSE BOX Disconnect the positive (+) and negative (–) starter cables from the battery before inspection and replacement of the alternator fuse box/fuse. 1) Check the 90A fuse for continuity. – If there is no continuity, replace the 90A fuse with the spare fuse.

– If there is continuity, install the 90A fuse on the alternator fuse box and check for continuity between the cable terminals. [4] To STARTER MOTOR B TERMINAL [2] To ALTERNATOR B TERMINAL 2) When installing the spare fuse on the reverse side of the cover, install so that the stamp of “90A” is at your side. [3] RED TAPE 18-25