honda — Electrical Equipment

• FUSE BOX/FUSE [1] TERMINAL [2] ALTERNATOR FUSE BOX Disconnect the positive (+) and negative (–) starter cables from the battery before inspection and replacement of the fuse box/fuse. NOTICE 1) Remove the fuses from the fuse box and check for blown fuse. [3] FUSE BOX 2) If the fuses are normal, install them in the fuse box and check for continuity between the terminals shown below. [6] A CONNECTOR (3P) [5] B CONNECTOR (4P) [4] C CONNECTOR (4P) [7] CONNECTORS VIEWED FROM THE FRONT SIDE 18-26 Fuse No.

1 Check point Between the terminal and the No.3 terminal of the C connector 2 Between the terminal and the No.2 terminal of the C connector 3 Between the terminal and the No.1 terminal of the C connector 4 Between the A connector No.3 terminal and the B connector No.4 terminal 5 Between the A connector No.2 terminal and the B connector No.1 terminal 6 Between the A connector No.1 terminal and the B connector No.2 terminal 7 Between the terminal and the No.3 terminal of the B connector