24. SERVICE PROCEDURE 4. If the oil does not reach the L mark on dipstick @, add engine oil through dipstick insertion hole ©. When refilling, remove bleeding plug @. NOTICE For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 5. If the oil level exceeds the H mark on the dipstick, loosen valve ® to drain the excess oil. 6. After checking oil level or adding drain oil, insert the dipstick into the hole and install air bleeding plug @. 24.4.3 DRAIN TANK WATER AND SEDIMENT before operating FROM FUEL 1. Carry out this procedure the machine. 2. Prepare 3.
Open valve @) at the bottom of the tank and drain the sediment a container to catch the fuel that is drained. and water that has accumulated at the bottom together with fuel. When doing this, be careful not to get fuel on yourself. 4. When only clean fuel comes out, close drain valve @. NOTICE Never use trichlene for washing the inside of the tank. 3-51