TESTING AND ADJUSTING FUEL SYSTEM (CALIBRATION DATA) 615002 12-12-4 8 12-12-4 9 Injection Pump Assembly Number Applicable Machine Applicable Engine 6151-72-1180 (092000-1210) Model Serial No. Model Serial No. ( ): Injection pump manufacturer’s part No.
D65EX-12, D65P-12 S6D125-2 Injection Injection pump D65PX-12 Pump Type Manufacturer D85E-SS-2 D85E-SS-2A NB(EP9) DENSO Injection pump specification Engine Specification Rotating direction Counterclockwise Flywheel horsepower (kW {HP}) / rpm) 141 {188}/1,950 (Net) Injection order 1 – 5 – 3 – 6 – 2 – 4 Maximum torque (Nm {kgm}/ rpm) 981 {100}/1,200 (Net) Injection interval 59°30’ – 60°30’ High idling speed (rpm) 2,050 – 2,150 Plunger pre-stroke (mm) 4.2 Low idling speed (rpm) 800 – 850 Delivery valve (mm3/st) 90 Pump tester capacity retraction volume Motor 7.5 kW for Service standard Calibration Standard ( ):
Injection pump manufacturer’s part number Applicable Machine Applicable Engine Model Serial No. Model Serial No. D65EX-12, D65P-12 D65PX-12 D85E-SS-2 D85E-SS-2A S6D125-2 Conditions Nozzle & nozzle holder part No. Nozzle part No. ‡ Service standard indicates data Nozzle holder part No. using calibration Injection pipe (mm) test parts. (Outside dia. x inside dia. x length) ‡ Manufacturer Test oil standard is data Oil temperature (°C) for factory test. Nozzle opening pressure (MPa{kg/cm2}) Transfer pump pressure (kPa{kg/cm2}) Service standard Manufacturer standard (093500-6090) (093400-0540) (093400-3020) (093100-0190) (093100-6090) 6 x 2 x 600 6 x 2 x 747 ASTM D975 No.
2 diesel fuel or equivalent 40 to 45 17.2 {175} 24.5 {250} 157 {1.6} Injection volume ‡ Rack positions B to E are the reference volume when adjusting the injection volume.
Rack point A (Basic poi B C D E Rack position (mm) Pump speed (rpm) Service standard (cc/1000 st.) Manufacturer standard (cc/ st.) Average injection quantity Maximum variance between cylinder Average injection quantity Maximum variance between cylinder 12.3 nt) 975 139 – 145 8 9.1 410 24 – 28 5 Governor performance curve Flywheel horsepower (kW {HP}) / rpm) 141 {188}/1,950 (Net) Maximum torque (Nm {kgm}/ rpm) 981 {100}/1,200 (Net) High idling speed (rpm) 2,050 – 2,150 Low idling speed (rpm) 800 – 850 Pump tester capacity for Service standard Motor 7.5 kW