Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

Transmission Oil Temperature Switch [G643E] Description Transmission Oil Temperature Switch is located in the adapter on transmission (T/M) for operating by the transmission (T/M) oil temperature change. This switch is normally open, and then it is closed as the T/M oil temperature Increases to the 125±3°C. Actually if the switch is closed by high T/M oil temperature, the ECM makes engine shutdown with fault set. If the T/M oil temperature decreases to the 118°C, the switch is open again and the engine also can run. This function can protect the engine of Tier- 3 and Non cert folk lift trucks from damage as overheating. Circuit Diagram [ G643E ] [Harness Connectors] Inspection 1.

Remove the Transmission Oil Temperature Switch from the transmission. 2. Use an ohmmeter to check the continuity between the 1 terminal and the 2 terminal. If there is continuity, replace the Transmission Oil Temperature Switch. 3. The Transmission Oil Temperature Switch is the ‘ON/OFF’ switch. So during the normal status the switch circuit should be open. G643(E) Service Manual Chapter 5. Engine Management System (EMS) 191