Komatsu — TRANSMISSION OIL FILTER - S/N A61018 AND UP

MAINTENANCE TRANSMISSION OIL FILTER - S/N A61018 AND UP 1. Position a container under the filter case to catch any oil spillage, then loosen the retainer ring (1) and lower the filter case (2) past the filter element (3). 2. Empty and discard the oil in the filter case, then clean out the filter case. 3. Remove the used filter element by sliding it off the filter core. 4. Install a new filter element. 5. Install the filter element case and secure it into posi- tion by tightening the retainer ring. 6. Run the engine for a short time at idle speed and check for oil leaks. Stop the engine. Check that the transmission oil is at the specified level. For details, see “TRANSMISSION OIL LEVEL“.

L07BVOl: 3-61