Komatsu — OPERATIONS AFTER STOPPING ENGINE

OPERATION STOPPING ENGINE 1. Run the engine at low idle speed for about 3 to 5 minutes to allow it to gradually cool down. 2. Turn starting switch (1) to the OFF position and remove the key. OFF * If the engine is abruptly stopped before it has been cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. * In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. ____________ ___ START Ll lAJOl0 OPERATIONS AFTER STOPPING ENGINE 1. Walk around the machine and check the work equipment and tires, also check for oil or coolant leakage.

If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for foreign matter and debris. If found, remove the matter and/or debris to avoid a possible fire hazard. 4. Remove any mud stuck to the underside of the machine. 2-59