OM3202 Operator Cab And Controls - Section 32 Page 32-27 A6. No Propel The red “no propel” light indicates a fault has occurred which has eliminated the propulsion capability. B6. Proper System @ Rest C6. Propel System Not Ready D6. Reduced Propulsion E6. Retard At Continuous Level e operator should utdown the engine rest” light is used to ctivated when the in nk energized lights ( be illuminated at th dy ctions during start-up he computer is in th up. Propulsion will n safely stop the truck, move selector switch to NEUTRAL, , and notify maintenance personnel, immediately.
indicate that the AC drive system is de-energized and propulsion strument panel rest switch is turned ON and the AC drive system one on rear wall of operator cab, and two on the deck-mounted is time. much like the hourglass icon on a computer e process of performing the self-diagnostics ot be available at this time. ion” aila . Th ev s” he har light is used to indicate that the full AC drive system perfor- ble. At this time, the only event that should activate this light is is mode of operation requires a technician to enable. el light indicates the retarding effort is at the continuous level. speed of the truck in accordance to the "continuous" speeds t on page 32-4.