Komatsu — Link-On Warning Light

The D.I.D. display panel is for use by maintenance personnel only, and is located out of the operator's field of vision for that reason. perator Cab And Controls - Section 32 OM3202 age 32-28 e 32-28 azard Warning Lights azard warning light switch (7, Figure 32-8) flashes all the turn signal lights. Pressing the ttom side of the rocker switch (toward the triangle) activates these lights. Pressing the p side of the rocker switch (toward the OFF symbol) turns these lights off. amp Test Switch mp test switch (8, Figure 32-8) is provided to allow the operator to test the indicator mps prior to starting the engine.

To test the lamps, and the warning horn, turn key witch (1, Figure 32-6) to the RUN position and press the bottom side of the rocker witch for the CHECK position. All lamps should illuminate, except those which are for ptional” equipment that may not be installed. The warning horn should also sound. Any mp bulbs which do not illuminate should be replaced before operating the truck. eleasing the spring-loaded switch will allow the switch to return to the OFF position. nk-On Warning Light he link on (or link energized) indicator light is located next to the D.I.D. display panel behind e passenger seat and indicates the AC drive system is energized.

ard Warning Lights ard warning light switch (7, Figure 32-8) flashes all the turn signal lights. Pressing the om side of the rocker switch (toward the triangle) activates these lights. Pressing the side of the rocker switch (toward the OFF symbol) turns these lights off. p Test Switch p test switch (8, Figure 32-8) is provided to allow the operator to test the indicator ps prior to starting the engine. To test the lamps, and the warning horn, turn key ch (1, Figure 32-6) to the RUN position and press the bottom side of the rocker ch for the CHECK position. All lamps should illuminate, except those which are for ional” equipment that may not be installed. The warning horn should also sound.

Any p bulbs which do not illuminate should be replaced before operating the truck. asing the spring-loaded switch will allow the switch to return to the OFF position. -On Warning Light