Komatsu — 15.4 STARTING MACHINE AFTER LONG TERM STORAGE

OPERATION 15.3 AFTER STORAGE NOTICE If the machine is stored without carrying out the monthly rust prevention operation, request your distributor for service. Carry out the following procedure when taking the machine out of long term storage. ! Wipe off the grease from the hydraulic cylinder rods. ! Add oil and grease to all places. 15.4 STARTING MACHINE AFTER LONG TERM STORAGE When starting the machine after a long term storage, first cancel the automatic warm up function as follows. 1. Turn the starting switch key to the ON position. 2.

Turn the fuel control dial from the low idle (MIN) position to the full (MAX) position, hold it there for 3 seconds, then return it to the low idle (MIN) position and start the engine. 2-100