MAINTENANCE Objects in your pockets: Keep your pockets free of loose objects which can fall out and drop into the machinery; especially when you work on the machinery while bending over it. Checking undercarriage: When working in rocky areas, check for damage to the undercarriage and for looseness, flaws, wear and damage in bolts and nuts. Loosen the track tension a little when working in such areas. Precautions when washing machine: Never spray steam or water directly on the connectors and mechatronics parts. Do not allow water to get on the monitors and controllers inside the operator’s cab. Never spray steam or water directly at the radiator or oil cooler portions.
Pre and post work checks: Before starting work in mud, rain, snow or at seashore, check plugs and valves for tightness. Wash the machine immediately after the work to protect components from rusting. Lubricate components more frequently than usual. Be sure to lubricate work equipment pins daily if they are submerged in water. Dusty work sites: When working at dusty work sites, do as follows: Inspect the air cleaner clogging monitor to see whether the air cleaner is blocked up. Clean the radiator core frequently to avoid clogging. Clean and replace the fuel filter frequently. Clean electrical components, especially the starting motor and alternator, to avoid accumulation of dust.
Avoid mixing oils: Never mix oils of different brands. If you have only oil which is a different brand from the one that is used in the machine, do not add it but replace all the oil. 3-3