Komatsu — 19. WEAR PARTS LIST

MAINTENANCE 19. WEAR PARTS LIST Wear parts such as the filter elements, bucket teeth, etc. are to be replaced at the time of periodic maintenance or before their abrasion limits. The wear parts should be changed correctly to use the machine economically. For part change, genuine Komatsu parts of excellent quality should be used. When ordering parts, please check the part number in the parts book. Use the current parts book to write in the numbers. ( ): The items in parentheses are to be replaced at the same time. 3-8 Item Part No.

Part Name Qty Replacement frequency Engine oil filter Cartridge 1 Every 250 hours of service Hydraulic oil filter Element (O-ring) 1 (1) Every 250 hours of service Fuel filter Cartridge 1 Every 500 hours of service Fuel-water separator Cartridge 1 Every 500 hours of service Hydraulic tank breather Element 1 Every 500 hours of service Air cleaner Double Element 1 When required Additional breaker filter Element (O-ring) 1 (1) See 23.2 MAINTENANCE INTERVAL WHEN USING HYDRAULIC BREAKER on page 3-22.

Electrical engine air intake heater Gasket 2 When required In-line fuel strainer Strainer 1 Every 500 hours of service Bucket SuperV Tooth Tooth adapter (pin for SuperV) - - (1/tooth) When required Left side shroud (bolt) Right side shroud (bolt) 1 (3) 1 (3) When required