MAINTENANCE 20. FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE 20.1 PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS It is not our policy to approve fuel, coolant and lubricants or to guarantee performance in service. The responsibility for the quality of the fuel, coolant and lubricant must remain with the supplier. When in doubt, consult your distributor. The specified fuel, coolant and lubricants recommended for this machine are as shown in the following table. SPECIFIED CAPACITY: Total amount of oil including oil for components and oil in piping. REFILL CAPACITY: Amount of oil needed to refill system during normal inspection and maintenance. ASTM:
American Society of Testing and Materials SAE:
Society of Automotive Engineers 3-9 RESERVOIR FLUID TYPE AMBIENT TEMPERATURE CAPACITY -22 -4 14 32 50 68 86 104EF -30 -20 -10 0 10 20 30 40EC Specified Refill Engine oil pan Engine oil SAE 30 26.3 R 6.95 gal 24R 6.34 gal S AE 10 W SAE 1 0W-30 S AE 15 W-40 Damper case 0.75 R 0.20 gal - - Swing machinery case SAE 30 5.5R 1.45 gal 5.5R 1.45 gal Final drive (each) 10R 2.6 gal 9.5R 2.5 gal Track front idler (each) 0.07 - 0.08R 2.4 - 2.7 oz 0.07 - 0.08R 2.4 - 2.7 oz Track roller (each) SAE 30 0.19 - 0.21 R 6.4 to 7.1 oz 0.19 - 0.21 R 6.4 to 7.1 oz Top carrier roller (each) 0.23 to 0.25 R 7.8 to 8.5 oz 0.23 to 0.25 R 7.8 to 8.5 oz Hydraulic system 246 R 65 gal 166 R 43.9 gal SAE 10W SAE 1 0W-30 SAE 1 5W-40 Fuel tank Diesel fuel See 20.5page 3-11 AS TM D9 75 No .
2 340 R 89.8 gal - - ASTM No D975 . 1 All lube fittings Grease N o.2 M ulti-pur moly pose lit bdenu hium g m disu rease lfide with 3% Fill as instructed Cooling system Coolant See 24.2.2 CLEAN INSIDE OF COOLING SYSTEM on page 3-27. 23.3 R 6.2 gal - -