Komatsu — 8.2 DURING MAINTENANCE

WARNING: Failure to follow these safety precautions may lead to a serious accident. SAFETY If flame is brought close to fuel or oil, there is danger that it will catch fire. Always do as follows. ! Stop the engine when adding fuel or oil. ! Do not smoke. ! Wipe up spilled fuel and oil immediately. ! Always tighten the caps of the fuel and oil fillers securely. ! Always add fuel and oil in a well-ventilated place. ! Do not leave the work place when adding fuel or oil. ! Grease is pumped into the track tension adjustment system under high pressure.

If the specified procedure for maintenance is not followed when making adjustments, the plug or grease fitting may fly out and cause damage or personal injury. ! When loosening the grease drain plug, never loosen it more than one turn. ! Never put your face, hands, feet, or any other part of your body directly in front of any grease drain plug or valve. Adjusting track tension ! See 24.2.4 CHECK AND ADJUST TRACK TENSION on page 3-32 ! If oil or fuel leaks from high-pressure hoses, it will cause serious injury through fire or defective actuation. If any damage to the hoses or loose bolts are found, stop operations immediately and contact your distributor. !

Experience and skill is required when replacing high pressure hoses. The tightening torque is determined according to the type and size of the hose, so please contact your distributor. ! If any of the following conditions are found, replace the part. " Damage, leakage and/or deformity from hose mouthpiece. " Wear, damage, cutting of covering, or exposure of strengthening wire layer. " Cover portion is swollen in places. " There is twisting or crushing at movable parts of hose. " Foreign material is embedded in the covering. 1-31 RULES TO FOLLOW WHEN ADDING FUEL PRECAUTIONS WITH HIGH PRESSURE GREASE WHEN ADJUSTING TRACK TENSION HANDLING HIGH PRESSURE HOSES