Doosan DL06 — Doosan DL06 User Manual

3.3.13. Oil pump and oil pipe z Install a dowel pin in the oil seal holder, then assemble the oil pump by tapping lightly with urethane hammer. z Tighten the fixing bolts with specified torque. z Assemble the oil suction pipe with the delivery pipe to oil pump by the bolts. 3.3.14. Oil seal z Apply lubricating oil to the outside of the oil seal and the oil seal hole Oil seal cover of the timing gear case cover. z Put the new oil seal on the oil seal Oil seal hole of timing gear case cover aligning the center of them, then assemble the oil seal using an oil seal fitting jig.

DL06 Diesel Engine Disassembly and Reassembly of Major Components 105 Torque M8 2.2+0.5 kg.m M10 4.4+0.5 kg.m Torque 2.2+0.5 kg.m