3.3.15. Oil pan z Remove the gaskets thoroughly that project at the timing gear case, case cover of cylinder block, and the contacting part of flywheel housing by means of a scraper. CAUTION : Be careful for the gasket pieces not fall into the engine during the work. z Coat the silicone at the gasket part that was removed (Contacting part), and attach the new oil pan gasket. z Assemble the oil pan by tightening the oil pan fixing bolts, and when tightening bolts, primarily tighten the bolts (4ea) at the both ends and then tighten the rest bolts to specified torque. z Align the bolt holes with gasket holes to prevent damage to the gasket and tighten.
DL06 Diesel Engine Disassembly and Reassembly of Major Components 106 Torque Oil pan 2.2+0.5 kg.m Drain plug 10+1.0 kg.m