3.3.16. Crankshaft pulley & vibration damper z Insert the vibration damper to the crankshaft, and assemble by tightening the assembling bolts at the specified tightening torque according to bolt tightening order. Socket bolt Bolt tightening order 3.3.17. Intake and exhaust valves z Identify the marks of " I " and " E " impressed on the valve head before assembling the valve with the valve head. Valve marking position z With a valve stem seal fitting jig, assemble the valve stem seal on the valve guide. Intake valve Exhaust valve z After installing valve springs and spring retainer, press the retainer with a jig, then install the cotter pin.
z Tap the valve stem lightly with a rubber hammer to check that the valve is assembled correctly. DL06 Diesel Engine Disassembly and Reassembly of Major Components 107 Torque Damper 6.2+0.5 kg.m Crankshaft pulley 20+2.0 kg.m