3) Crankshaft run-out z Support the crankshaft on V- blocks. z Turn the crankshaft with a dial indicator placed on the surface plate and take the amount of crankshaft run-out. (2) Crankshaft bearing and connecting rod 1) Visual check z Visually check the crankshaft bearing and connecting rod bearing for scratch, uneven wear or damage. 2) Oil clearance between crankshaft and bearing (Method 1 :
dial gauge) z Main bearing clearance Install the main bearing in the cylinder block, tighten the bearing cap to specified torque, then measure the inside diameter Compare the two values obtained through measurement of main bearing inside diameter with the outside diameters of crankshaft journals to determine the oil clearance. DL06 Diesel Engine Disassembly and Reassembly of Major Components 84 Standard Limit 0.06 mm Less than 0.15 mm Torque 30±2 kg.m