z Connecting rod bearing clearance Install the connecting rod bearing in the connecting rod bearing cap, tighten the connecting rod cap bolts to the specified torque, then measure the inside diameter. z Compare the two values obtained through measurement of connecting rod bearing inside diameter with the outside diameters of crankshaft pins to determine the oil clearance. z If the clearance deviates from the specified range, have the crankshaft journals and pins ground and install undersize bearings. DL06 Diesel Engine Disassembly and Reassembly of Major Components 85 Standard Limit 0.045 ∼ 0.110 mm 0.15 mm Torque 9.75±0.25kg.m Standard Limit 0.030 ∼ 0.081 mm 0.15 mm