Doosan DL06 — Doosan DL06 User Manual

3.2.7 Injector projection Insert a seal ring on the cylinder head and assemble Cylinder head Injector the injector. (Refer to 3.3 chapter for assembly order) Measure the clearance between the cylinder head A B bottom and injector tip. If the measured valves are beyond the limit, replace the seal ring. DL06 Diesel Engine Disassembly and Reassembly of Major Components 93 Standard Limit 0.170 ~ 0.3 0.50 mm A (Thickness of seal ring) 2.0 mm B (Projection of nozzle) 3.0 mm