Mack Trucks — Mack RH Drive Australia 21630923 Manual

52 INSTRUMENTS AND CONTROLS 15. Engine Shutdown Indicator (Red) – Indicates the occurrence of a condition which requires that the engine be shut down (i.e., low water level, low oil pressure or high water temperature). If the engine shutdown feature is enabled, the engine will be forced to idle. Once vehicle is stopped, the engine will shut down. If the engine shutdown feature is disabled, the indicator will function as a warning light but the engine will not shut down. 16. Air Suspension Low Indicator (Amber) (DPF) 16. Aftertreatment DEF Low Level Indicator (DEF) (SCR) Icon illuminated when the fluid level is low. It also flashes when the level becomes critically low. 17.

Anti-Lock Brake System (ABS) Indicator (Amber) Indicates an ABS malfunction. If the light turns on and stays on, a malfunction is indicated. For additional information on operating an ABS-equipped vehicle, refer to “Anti-Lock Brake System (ABS)”, page 120of the Operation section. Note: When an ABS malfunction is detected, anti-lock braking in the affected wheel(s) will be disabled and normal braking will return; the other wheels will retain anti-lock braking. Operate the vehicle normally and have the ABS system serviced to correct the fault. 18. Low Coolant Level Indicator (Amber) – Illuminates when the coolant level in the coolant surge tank is below the specified level.

Stop and add coolant. Use typical warnings, etc., for filling coolant. 19. CO-PILOT® – Co-Pilot® is an in-dash computer that allows the vehicle operator to monitor information supplied by the V-MAC® electronic control system. The Co-Pilot® enhances the functions of V-MAC® by entering requested information with the stalk switch. The Co-Pilot® is very "user friendly" and prompts the operator with messages on the display screen. For more information on how to use the Co-Pilot®, please consult the V-MAC® IV Vehicle Management and Control with Co-Pilot® Display Operator’s Guide. 20.

Water in Fuel Indicator (Amber) (If Equipped) Illuminates when water accumulates in the primary fuel filter sediment bowl. Stop the engine and drain the fuel from the sediment bowl. 21. Engine Over Speed Indicator (Red) Illuminates when maximum engine RPM is exceeded. 22. Trailer Anti-Lock Brake System (ABS) Indicator (Amber) Indicates an ABS malfunction. If the light turns on and stays on, a malfunction is indicated. For additional information on operating an ABS-equipped vehicle, refer to “Anti-Lock Brake System (ABS)”, page 120of the Operation section. Note:

When an ABS malfunction is detected, anti-lock braking in the affected wheel(s) will be disabled and normal braking will return; the other wheels will retain anti-lock braking. Operate the vehicle normally and have the ABS system serviced to correct the fault. 23. Cruise Control Indicator (Green) – Indicates that cruise control is engaged.