INSTRUMENTS AND CONTROLS 53 24. Power Take-Off Operating Indicator (Green) – Indicates PTO operation. 25. Right Turn Signal Indicator (Green) Flashes green when turn signal is activated. 26. Bendix Adaptive Cruise Control Indicator ACC (Red ) Requesting the driver to take immediate evasive action by applying more braking power and/or steering clear of the vehicle ahead to avoid potential collision. 27. Reverse Indicator (Amber) – Indicates that the transmission is in Reverse. 28. Automatic Traction Control (ATC) Indicator (Amber) – Indicates that ATC is operating and will flash when in deep mud and snow mode. 29. Neutral Indicator (Amber) – Indicates that the transmission is in Neutral. 30.
Fasten Seat Belt Warning Indicator (If Equipped) (Red) 31. High Exhaust System Temperature (HEST) Icon – when (HEST) illuminates do not park or operate the vehicle near people, or any flammable materials, vapors, or structures. 32. Fuel Gauge – Registers the fuel level in the supply tank(s). 33. Speedometer – Indicates road speed in miles and/or kilometers per hour. 34. Tachometer Indicates engine speed in revolutions per minute (RPM). Tachometer readings should be used as a guide for shifting, as well as to prevent engine damage due to overspeed. 35.
Air Application Gauge (If Equipped) Indicates the air pressure being delivered to the service brake chambers in the tractor (and trailer, if equipped); OR Air Suspension Gauge (If Equipped) – Indicates the air pressure being delivered to the air suspension system 689 kPa (100 psi range). 36. Front Rear Axle – Indicate front rear axle oil temperature. 37. Rear Rear Axle Oil Temperature Gauges (If Equipped) – Indicate rear axle oil temperature. CAUTION The maximum safe oil temperature for MACK rear axles is 121°C (250°F). Continued operation with oil above this temperature will cause rapid deterioration of the oil’s lubricating properties and is NOT recommended.
Consult the vendor manual for non-MACK components.