WHEN REQUIRED Cleaning or replacing outer element Ir Remove one seal from the outer element. The number of times the outer element has been cleaned can be seen by the number of removed seals. * Check inner element mounting nuts for looseness and, if neces- sary, retighten. * Replace seal washer (4) or wing nut (2) if they are broken. 1. Remove wing nut (2) and outer element (3). + Replace the outer element which has been cleaned 6 times repeat- edly or used throughout a year. Replace the inner element at the same time.
* Replace both inner and outer ele- ments when the dust indicator red piston appears soon after in- stalling the cleaned outer element even though it has not been cleaned 6 times. 2. Clean the air cleaner body interior and the removed cover. 3. Clean and inspect the element. (See the item “Cleaning outer ele- ment” for cleaning procedure.) 4. Install the cleaned element. 5. Push the dust indicator reset button to return the red piston to the original position. - 108- W-04318