Komatsu — PRECAUTIONS FOR MAINTENANCE

PRECAUTIONS FOR MAINTENANCE DURING MAINTENANCE l When getting on or off the machine, use the steps, hand grips and ladders. Never jump on or off the machine. If the steps, hand grips, or ladder cannot be used, use a stand to give firm footing. l Be particularly careful when removing the radiator cap or the hydraulic oil tank filler cap. If this is done immediately after using the machine, there is a danger that boiling water or oil may spurt out. MISCELLANEOUS l Thoroughly wash the machine, particularly the oiling and greas- ing parts and the vicinity, thereof, in order to prevent the ingress of dust. l Use genuine Komatsu replace- ment parts specified in the parts list.

l If necessary, remove the cables from the battery terminals. When charging the battery, make sure the area is well ventilated. a Exhaust gas is dangerous. When working inside, be particularly careful to have good ventilation. a When opening inspection covers, stop the engine. If the hood or other covers are fitted with a lock, always apply the locks securely when opening or closing the hood or cover. l Always release the pressure in the circuit before checking or ser- vicing the oil, water or air circuits. l Use Komatsu specified oil and grease. Use oil and grease having the recommended viscosity for the particular ambient temperature.

l When the engine stops, the water and oil in the circuit is hot, so be careful not to get burned. Wait for the water and oil to cool before starting any work on the machine. l Use clean oil and grease and keep them in clean containers’to avoid the ingress of dust. l Inspect or replace oil in a dust- free location to prevent the in- gress of dirt. l Drain off used oil after heating it to a suitable temperature (about 20 to 40°C). l Always stop the engine before adjusting belt tension or before checking or servicing the water pump. W-01318 -9-