PRECAUTIONS FOR MAINTENANCE When the strainer is located in the oil filler, the strainer must not be removed while adding oil. When adding oil or checking the oil level, check that the oil is at the correct level. After greasing up, always wipe off the old grease that was forced out. When changing the oil or filter, check the drained oil and filter for any signs of excessive metal particles or other foreign materials. When removing parts containing O-rings, gaskets or seals, clean the mounting surface and replace with new sealing parts. When washing the machine, ensure that water does not get onto the alternator. Special measuring apparatus is needed for testing hydraulic pressure.
Thoroughly wash the machine. In particular, be careful to clean the filler caps, grease fittings and the area around the dipsticks. Be careful not to let any dirt or dust into the system. When check an open cover there is a risk of dropping things in. Before removing the covers to in- spect cover, empty everything from your pockets. Be particularly careful to remove wrenches and nuts. When working on the sea shore, carefully clean all electrical equip- ment to ensure that is does not corrode. Before working in muddy water, rain or snow, check that the vari- ous plugs, valves, are properly screwed up.
Upon completion of work, wash the machine, then check the various parts of the machine for cracking, scratching, loose or missing nuts and bolts. Also, oil and grease the various parts of the machine. When working on rocky ground, be careful of damage to the undercarriage, loose nuts and bolts, cracks, wear and other damage. -lO- w-02145