PRECAUTIONS FOR MAINTENANCE l When working in a dusty loca- tion, be careful of the following: l After disconnecting the con- nector, cover it with a vinyl bag to prevent oil or dust from stick- ing to its contact section. I) Inspect the dust indicator to see whether the air cleaner is blocked up. Clean the air cleaner as soon as it becomes dirty. l When welding, be careful of the following: 2) Clean the radiator core so that it does not become blocked up. 3) Clean or replace the fuel filter as soon as it becomes dirty. 1) Turn OFF the power (starting switch). 2) Do not continuously apply more than 200 V.
4) Clean the electrical equipment, particularly the starting motor and alternator, to prevent ac- cumulation of dust. 3) Install the ground cable at least 1 m from the range to be welded. 4) Take care not to install the seals between the grounded point and the range to be welded. * Use ordinary automobile washer fluid. Be careful not to let dirt or dust get in. l When installing car radio and a walkie-talkie or citizen band, con- tact your Komatsu distributor. l When washing the machine, take care not to splash water over the electrical equipment. If it is soaked with water, it may not operate normally. W-02707 -ll-