Komatsu — BUCKET OPERATION

BUCKET OPERATION BUCKET OPERATION Various types of attachments are available to extend the range of application beyond the applica- tions described below. When driving the machine for- ward and lowering the bucket, stop the bucket about 30 cm from the ground, then lower it slowly. If the bucket hits the ground, the front tires will come off the ground, and the tires will slip. 2. Shift down immediately in front of the material to be loaded. When completing the shift down, depress the accelerator pedal at the same time and thrust the bucket into the load. EXCAVATION When loading piled soil or blasted rock, drive the machine forward as follows to load.

To prevent cutting of the tires caused by the tires slipping, be careful of the following points during the operation. Always keep the operating jobsite flat, and remove any fallen rocks. When working with stockpiles, operate the machine in 1 st or 2nd, operate the machine in, 1 st when loading blasted rock. stockpile - 12 - W-03818