Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE LOCATIONS FOR ADJUSTMENT AND NEED FOR ADJUSTMENT WARNING Angledozer REMARK 4 - 37 It is dangerous if the work equipment moves by mista ke when it i s being adjusted. Move the machine to a horizontal place, stop the machine, an d set the work equipment in a stable condition. Then stop the engine and set the work equipment lock lever a stable condition. Then stop ever securely to the L OCK position. Power tiltdo zer Powertilt, Po wer pitch dozer Semi U-doz er 1. Adjust the play of each l ink ball joint at positions (1) to (4). (1) Tilt brac (2) Lift cylin (3) Center (4) Trunnio e, tilt cylinde r head, pitch cylinde 2.

Adjust the t ension of center brace (5 For details of th e procedure for adjusting each l ocation, se e the "ADJUSTING SHIMS AT TILT TILT C YLINDER HEAD , PITCH CYLINDER HEA "ADJUSTING SHIMS AT LIFT CYLINDE R HEA "ADJUSTING SHIMS AT CENTER BRA GE 4-40)" "ADJUSTING SHIMS AT TRUNNION (P "ADJUSTING TENSION OF CENTER B (PAGE 4-42)"