ELECTRICAL RPM CONTROL Rpm Control for Each Mode (H, S and L), CX210/CX240 1) Maximum rpm is obtained by selecting H mode. 2) S mode speed is 200 rpm less than H mode. 3) L mode speed is 300 rpm less than H mode. 4) Auto mode speed varies, 150 rpm less than H mode to 250 rpm less than H mode. 5) Idle speeds are permanently stored in the controller memory. The machine is in the Auto mode when the key switch is ON . If the throttle knob is set at a lower rpm, speed changes will be different because of the spring deflection of the throttle linkage. 4 - 14 CX EXCAVATORS