DRESSTA Co. Ltd. TD-40C98/1E — 5.9. FAN AND FAN HUB

MAINTENANCE SECTION 5 Page 27 5.8. COOLING SYSTEM Fig. 5.11. Crankcase Coolant Drain Plug 5.8.8.2. Filling the Drained System 1. Close the oil cooler drain valve, radiator drain valve and two crankcase drain valves and coolant filter shut-off. 2. Fill the cooling system slowly. This allows more air to escape and the system to be filled to maximum capacity. The percentage of antifreeze to add for freeze protection can be determined from the antifreeze and coolant chart. Refer to “ANTIFREEZE”. 3. Start engine and run until normal operating temperature is reached; adding coolant when needed to keep proper level of 25 mm above the baffle. 4.

After all air is removed and level remains fixed, install the radiator cap. 5.9. FAN AND FAN HUB Fig. 5.12. Fan WARNING! Keep clear of fan and fan belts when engine is running. Rotating fan and belt contact can cause injury. DRESSTA TD-40C