SECTION 5 MAINTENANCE Page 28 5.9. FAN AND FAN HUB 1. Check the condition of fan blades (cracks, damaged, rivets, loosen mounting bolts) and bearing of idler pulley (lubrication of idler hub is not applicable for QSK-19) 2. Reversible fan blades (if equipped) should be after every 250 hours reversed to prevent excessive contamination in engine and cooler compartment. After reversing the blades adjust them in required position. Fig. 5.13. Idler Arm Lube Fitting 3. Lubricate fan idler arm every 250 hours Fig.14. Fan Hub Lube Fitting 4. Lubricate QSK-19 fun hub every 1500 hours or once a year. 5.10. ELECTRICAL SYSTEM Precautions WARNING!
BEFORE WORKING ON THE ENGINE OR ELECTRICAL SYSTEM, turn off the electrical system master switch and remove the key. All terminals must be clean and fastened securely. Replace frayed, cracked, and poorly insulated wiring. TD-40C DRESSTA