SECTION 5 MAINTENANCE Page 34 5.11. ENGINE Fig. 5.20. Filling the Crankcase 1. Cooling System Fast Fill Receiver 2. Crankcase System Fast Fill Receiver 5.11.3. ETHER INJECTOR (if equipped) Precautions WARNING! Ether starting fluid is highly flammable. Follow the precautions on the container. An explosion can result if sparks or flame contact the ether. Observe the following precautions: Do not use the ether injector when the air temperature is above 0°C. Do not use open flame when using ether-starting fluid. Do not store fluid containers in the operator's compartment. Store the containers in a cool, well- ventilated place. Keep the fluid containers out of unauthorized personnel.
Do not breathe the hazardous ether vapor. Do not let ether contact you skin, because it can cause frostbite. Never puncture the fluid container or put it into a fire. Dispose of empty containers properly. For your safety, remove the ether container when welding, grinding, or using a torch on the machine. Follow the correct method for starting the engine. Refer to “STARTING THE ENGINE” in this manual. NOTE: The ether starting valve inlet must be sealed against the entry of dirt at all times by having a fluid container installed or by installing the dust cap provided with the valve. TD-40C DRESSTA