MAINTENANCE SECTION 5 Page 53 5.18. TRANSMISSION SYSTEM 5.18.2. CHANGING TRANSMISSSION SYSTEM OIL Fig. 5.45. Rear Frame drain Plug 1. Drain Plug The transmission system lubricant must be changed at least once a year, even if the 1000 hours operational period has not elapsed. 1. To drain oil, remove the drain plug in the rear frame. For environmental safe draining the transmission system oil remove protective cover of receiver (Fig. 5.44) and connect nozzle of oil draining pump. 2. Remove oil level gauge with cover. Pump out used oil and pour lubricant into the rear frame through the receiver to bring the level up to the FULL mark on the gauge. 3. Reinstall protective cover on the receiver.
5.18.3. SERVICING THE PRESSURE FILTERS NOTE: If the pressure filter warning light on the instrument panel remains on at operating oil temperature with engine running, the restricted pressure filter must be changed. 1. With the engine stopped, operate the steering levers several times to relieve any pressure. Open the L.H. side access door. Remove all outside dirt from filter and using a filter wrench remove spin-on filters, first “M” main pressure circuit filter and then Torque Converter circuit filter. Wipe the filter base, removing all of the old oil from the seal area. DRESSTA TD-40C