DRESSTA Co. Ltd. TD-40C98/1E — 5.18. TRANSMISSION SYSTEM

SECTION 5 MAINTENANCE Page 54 5.18. TRANSMISSION SYSTEM Fig. 5.46. Transmission Pressure Filters 1. “M” Main Pressure Filter 2. Torque Converter Pressure Filter 2. Coat the seals on the new filters with clean oil. Install the filter by threading it onto the filter base until the seal contacts the base, turn the filter by hand an additional 1/4 to 1/2 turn. Start the engine and let it idle for approximately 5 minutes. During this time operate the steering levers several times, check filters for leaks and remove leaks if any. 3. Check oil level in the transmission system. Fig. 5.47. Transmission Pressure Filter 1. Filter Seal 2. Filter Element 3. Filter Base TD-40C DRESSTA