DRESSTA Co. Ltd. TD-40C98/1E — 4.18. OPERATING MOUNTED EQUIPMENT

OPERATING SECTION 4 Page 29 OPERATING MOUNTED EQUIPMENT 4.18.5. TILT LH TILT Pull the control lever to the left to lower the left hand corner of the blade. The lever will return to the hold position when released. RH TILT Push the control lever to the right to lower the right hand corner of the blade. The lever will return to the hold position when released. 4.18.6. PITCHING THE BLADE 1. To pitch the blade backward (decrease suction angle) press the button 4 and push the blade control lever to the right (outward I direction). 2. To pitch the blade forwards (increase suction angle) press the button 4 and pull the blade control lever to the left (inward III direction). Fig. 4.26.

Pitching the Blade 1. Blade Control Lever 2. Ripper Control Lever 4. Blade Pitch Button I - Blade Pitch Aft II - Neutral III - Blade Pitch Forward 4.18.7. RIPPER CONTROL LEVER NOTE: For proper operation of ripper control lever and observation of working tool it is necessary to swivel the operator’s seat 15° to the right. DRESSTA TD-40C